Wood looks
Compare grain direction, tone and texture on guest-room doors, reception desks and wall panels.
Authorized preferred dealer · 3M DI-NOC Preferred Installers
3M DI-NOC supply & installation
Give existing doors, elevator interiors and landings, casework, walls, ceilings, reception desks, furniture and retail fixtures a new finish with 3M DI-NOC architectural film. Resurface Wraps supplies the material and provides professional installation across the United States and U.S. territories.
Request finish samples
Trusted by Leading Brands
Material supply + professional installationCommercial renovation specialistsUnited States + U.S. territories
3M architectural finishes
Architectural finishes for a coordinated commercial refresh.
3M DI-NOC is a self-adhesive architectural finish that brings wood, metal, stone and other surface designs to suitable existing interiors. It is used on doors, walls, columns and cabinets, including selected curved details. The finish changes; the underlying surface can stay in place when it is sound and compatible.
If you are searching for a 3M DINOC installer, interior wrap or architectural vinyl wrap, you are looking at the same type of resurfacing service. We help connect the specified DI-NOC pattern with the real conditions on site: existing coatings, door edges, panel joints, daily wear and access for installation.
Find your finish
3M DI-NOC finish options
Start with the look, then confirm the pattern's suitability. Review a physical sample in your lighting before the final selection.
Metal looks
Consider brushed and other metallic appearances for elevator panels, surrounds and architectural details.
Stone & mineral looks
Bring a stone or concrete appearance to suitable interior surfaces without installing a new stone panel.
Specialty series
Ask about DI-NOC AR for abrasion resistance or EX for exterior work. These are separate selections with their own requirements.
Have a finish code already? Send it with your sample or quote request.
Our full range of applications
What we wrap with 3M DI-NOC
From a single surface to a coordinated renovation, explore the full range of work we can assess for 3M DI-NOC. We confirm the selected finish, surface condition and installation requirements for each application.
Commercial doors & frames
Refresh guest-room doors, office doors, corridor doors and compatible frames. We plan the faces, edges, hardware cutouts and preparation for a consistent finish across the property.
Door wrapping →Elevator cab interiors
Renew suitable elevator wall panels, interior door faces and cab details. The scope identifies seams, trim, handrails and access requirements so the finish works with the existing elevator interior.
Elevator interior wrapping →Elevator landings & surrounds
Coordinate landing door faces, jambs, headers and surrounding panels from floor to floor. We assess the existing surfaces and plan transitions around call buttons, signage and adjacent finishes.
Elevator landing wrapping →Cabinets, casework & millwork
Resurface cabinet doors, drawer fronts, exposed ends, storage units and fitted millwork. Surface condition, edge profiles and repeated components guide the preparation and installation plan.
Casework & millwork wrapping →Walls, panels & columns
Transform compatible wall panels, feature walls, columns and architectural details. We confirm substrate preparation and coordinate grain direction, panel joints and finish transitions.
Wall surface wrapping →Ceilings & soffits
Update suitable ceiling panels, soffits and overhead features. We review the substrate, access, attachment condition and finish requirements before defining an overhead installation.
Architectural ceiling wrapping →Reception desks & lobbies
Refresh reception desk faces, check-in counters, concierge stations and lobby millwork. Coordinate the selected finish with nearby doors, wall panels and elevator areas.
Reception & millwork finishes →Furniture & built-ins
Renew suitable desks, credenzas, wardrobe fronts and fitted furniture. We review daily use, cleaning, detailed profiles and existing damage before specifying the surfaces to wrap.
Furniture & built-in resurfacing →Retail counters & fixtures
Bring a consistent look to checkout counter faces, display units, shelving faces and store fixtures. We can plan a single location or coordinate the scope of a wider retail refresh.
Retail resurfacing →One surface or a coordinated property refresh. Tell us which doors, elevators, casework and other surfaces need work, and we will help define the material and installation scope.
Quote your surfaces →See the transformation
The same elevator.
A completely different finish.
Architectural resurfacing can change the look of an existing interior while retaining suitable panels. These photographs show an elevator renovation from the Resurface Wraps portfolio.
Project example. The film brand and pattern for your project are confirmed during specification.
Details that make the difference
Specify the DI-NOC series, not just the color
3M's Comply adhesive technology provides channels that help trapped air escape during application. It supports installation; it does not eliminate the need for cleaning, repair, adhesion checks and careful edge finishing.
For areas with frequent contact, compare the Abrasion Resistant series with the standard finish you are considering. DI-NOC AR is designed to reduce visible scratching. An exterior storefront or facade is a different specification: an appropriate EX finish, exposure review and compatible substrate are required. Standard interior film should not be substituted automatically.
Need submittals? Tell us the selected finish and the requirements for the project. Performance ratings and approvals must match the material and installation system.
3M DI-NOC product information ↗3M DI-NOC AR series ↗3M DI-NOC EX series ↗3M catalogs & technical resources ↗
Our DI-NOC™ material is supplied through Surface Supply, an authorized 3M™ DI-NOC™ distributor with US-stocked Quick-Ship finishes.
Material + preparation + labor
What does 3M DI-NOC installation cost?
A bank of flat hotel doors and a detailed reception desk can use the same pattern but require very different labor. Your DI-NOC estimate accounts for the finish, quantities, surface repairs, returns, hardware, pattern direction and installation access. Send door counts or dimensions and photographs of the faces and edges to help us define the scope.
Resurfacing can retain serviceable components, but it is not the right answer for every damaged or unsuitable surface. We define what can be wrapped, what needs repair and what may need replacement before finalizing the proposal.
Price your project →From the sample to the finished surface
We work with hotel owners, facility managers, designers, architects and renovation contractors. The scope and schedule are planned for the property's operating needs.
Define the surfaces
Share photos, dimensions, location and schedule. We review substrate condition, access and the areas suitable for resurfacing.
Approve the finish
Compare physical samples and agree on the pattern, preparation, edge details and documentation needed for your project.
Plan the work around the property
We coordinate installation access and phasing, prepare the surfaces, apply the finish and check seams, edges and transitions.
Before you specify
3M DI-NOC questions, answered
Can 3M DI-NOC be installed over existing doors and cabinets?
Often, yes, when the substrate is sound, suitable and properly prepared. We check the existing finish, damage, joints and edge conditions before recommending an interior wrap. Film does not repair a failing door or cabinet structure.
Are DI-NOC and DINOC the same material?
DI-NOC is the official 3M product name. DINOC and Di Noc are common search spellings. For a quote or sample request, a specific 3M pattern code is more useful than the spelling variation.
What is the difference between standard DI-NOC and DI-NOC AR?
The AR series has an abrasion-resistant surface designed to reduce visible scratching. The right choice depends on the selected pattern, type of contact and maintenance expectations. It is not a promise that a surface cannot be scratched.
Can 3M DI-NOC be used outdoors?
Exterior work requires an appropriate exterior product such as a suitable DI-NOC EX finish and a review of substrate and exposure. An interior finish is not automatically suitable outside, and exterior products have their own shape and installation limitations.
Can you supply the material and install it?
Yes. Resurface Wraps is an authorized preferred dealer and installation partner for 3M DI-NOC, and our team includes 3M DI-NOC Preferred Installers. We can coordinate finish selection, material supply, surface preparation and installation for your project.
Tell us about your project
Request 3M DI-NOC samples or an installation quote
Include your project location, surfaces, approximate quantities and target schedule. Mention 3M DI-NOC and any pattern codes in your message. We will help define the next step.
Prefer to talk through it? Call (833) 377-4916 or email our team.
Compare the other materials we install
The best fit comes from the finish, substrate, project requirements and installation detail. Explore the other architectural film brands we supply.
View Resurface Wraps case studies → Meet our installation team →
Material information checked September 6, 2026. Project recommendations by Resurface Wraps.
Brand names are trademarks of their respective owners. Specific finishes, samples, availability and technical requirements are confirmed for each project. Project photography illustrates architectural resurfacing; it does not identify a particular film brand or pattern.